Nosfet Xeno EUC - 126V 2200Wh Battery - 2500W Electric Unicycle

Pre-order: ETA Late July

Free Gift: Beidou leg pads AND seat included as part f your purchase!

The electric unicycle world has a new heavyweight contender in terms of performance, yet it remains an absolute featherweight on the scales. Enter the Nosfet Xeno: a masterclass in aggressive engineering, raw power, and next-level aesthetics. Born from pure passion and designed for riders who refuse to compromise, the Xeno takes the core expectations of the 20-inch performance class and completely blows them out of the water. While it carries a heavier footprint and delivers more raw power than the ultra-light Nosfet Aeon, the Xeno is a staggering 8 lbs lighter than the Leaperkim Patton-S. The resulting power-to-weight ratio is completely off the charts. Featuring a dual-board architecture, robust bidirectional suspension, and a low center of gravity, the Xeno is equally at home carving up technical singletrack as it is flying down the asphalt.

Key Upgrades & Features

- Unrivaled Power & Torque: At the heart of the XENO lies a beastly high-torque motor pushing a conservative 2500W nominal rating and a staggering 10,000W of peak power (3000w higher than the Patton-S). Driven by dual-board controller packing 24 Mosfets and a massive 495A max current capacity, this wheel delivers instantaneous, relentless pull. Whether you are blasting up vertical inclines or launching off the line, the Xeno provides an uncompromising surge of torque that leaves other wheels in the dust.

- More is Less: Despite its robust build and rigid frame, the Xeno is engineered with optimized mass distribution. Because of its ultra-light construction, the immediate torque application from the Xeno means you spend less time fighting inertia. The mass effectively vanishes the moment you lean into it, resulting in incredible nimbleness, agility at high speeds, and effortless, predictable flight when jumping the wheel.

-Suspension Perfection (Symmetrical Bidirectional): The Xeno introduces a high-performance symmetrical bidirectional suspension system offering 90mm of travel. This advanced design features independent compression, rebound, and preload adjustments on each side, allowing a single coil configuration to adapt seamlessly to multiple rider weight classes. Best of all, compression and rebound settings are finger-adjustable - no tools needed!

- Reduced Maintenance: Built with premium materials and a magnesium alloy materials, the XENO chassis is designed to withstand the harshest environments while also staying ultra-lightweight. With IPX6 waterproofing and high structural tolerances, you spend less time turning hex wrenches and more time riding. Nosfet has among the best QC in the industry, and it is reflected in their sterling reputation by having the most reliable products on the market.

- NOSFET-Grade Pedals: The XENO comes equipped with lightweight cast pedals, outfitted with an additional two different sized overlays that screw onto the pedal bases. These nylon bases 

- Superlative Safety: Hall Sensorless Emergency Mode: Rider safety is paramount. The XENO features an advanced hall sensorless emergency algorithm. If the motor's hall sensors experience an unexpected failure or communication drop, the motherboard instantly and seamlessly transitions to the sensorless algorithm to keep the wheel balancing, letting you ride to safety in a reduced power state rather than suffering a sudden cutout.

- Blazing Visibility: Own the night with an ultra-bright 20W headlight featuring a smart, speed-dependent auto-brightness algorithm. Paired with a customizable RGB multi-mode taillight, you'll remain perfectly visible whether you are navigating city traffic or hitting pitch-black singletrack.

- Intelligent Software Customization: Control your ride down to the exact percentage. Via the crisp integrated display or application, riders can fine-tune pedal hardness (0%–100%), adjust acceleration assist, pedal tilt, set PWM and speed tilt-backs, and dial in a side-tilt angle cutoff optimized for extreme trail riding.

A complimentary set of pads made by Beidou will be included for free (shipped separately) as part of your Xeno order.

Specifications

- Motor: 2500W Nominal / 10000W Peak

- Voltage: 126V

- Battery: 2200Wh, Samsung INR21700 50S cells

- Maximum real-world riding speed: ~50 mph

- Maximum sustainable riding speed: ~45 mph

- Freespin Lift Speed: 95 km/h (~59 mph)

- Tire size: 80/90-14 (20 inches edge-to-edge)

- Tire Options: Off-road, street, or hybrid

- Suspension type: Symmetrical Bidirectional Coil/Oil

- Suspension Travel: 90mm

- Trolley Handle: Yes, locking in both upright and stowed positions

- Headlight: 20W with Auto-Brightness, Daylight Running Lights and daylight sensor

- Taillight: Multi-mode RGB

- Maximum Charging speed: TBD (10+ amps confirmed)

- Included Charger: 5A (Charges in ~5 hours)

- Smart BMS: Yes - Features a highly intelligent BMS inspecting each individual string of cells with overvoltage and over-discharge protection.

- Cutout Protection Safety: Hall sensorless emergency mode balancing; Low voltage protection alerts begin at 91.5V, tilt-back initiates at 88.5V, and emergency BMS shut-off occurs at 85.5V.

- Waterproofing: IPX6

- Spin-kill/parking button: Yes (Lift Switch Mode)

- Weight: 72.7 lbs

• Dimensions: Height 925mm x Width 283mm x Length 545mm

Note: Any power pads or similar accessories used with these EUCs are optional accessories. They are not required for operation of the product.

Important safety notice: Electric unicycles are inherently dangerous and may fail without warning, including through sudden power loss or cut-outs. Lithium-ion battery systems also present fire-related risks. Review all terms, safety rules, local regulations, and warranty frameworks before completing your purchase.